|Upon arrival please review the hallway monitor for current course location and time.|
|FY 2015 SCHEDULE|
|FY 2016 SCHEDULE|
|The course emphasizes Craft Engineer duties specifically in the area of electrical/mechanical systems operation and control systems. Equipment casualty control procedures and basic craft operational capabilities. Provide the knowledge and skills required to function as the Assistant Operator assisting in operating the Landing Craft Air Cushion (LCAC) in normal emergency and degraded modes; over water and land in all conditions, including ships well deck entry/exit and be certifiable as an LCAC Engineer/Assistant Operator.|
|This course consists of 155 hours LCAC classroom training, which includes systems, rules of the road and operation. This course also consists of 195 hours of LCAC Full Mission Trainer (FMT) training and actual LCAC systems operation.|
|Must be fully qualified for special duty in accordance with the Manual of the Medical Department (NAVMED P117). Successfully complete the Naval Aeroscope Medical Research Laboratory (NAMRL) LCAC Operator Psychomotor Test at ACU-4/ACU-5. Must be qualified second-class swimmer in accordance with SEAOPS VOL II. SECOND CLASS SWIMMER MUST BE DOCUMENTED IN STUDENT ORDERS. Must be qualified in accordance with New Construction Screening MILPERSMAN Article 1306-949 (NAVPERS 15560D). MUST be eligible for SECRET clearance. This course is open to all Engineering ratings in paygrade E5-E7. Minimum ASVAB score of AR+MK+EI+GS = 204.
Reporting students must have passed their most recent PFA and been screened for BCA standards. In addition, detaching commands must conduct re-certification within five working days of transfer. Within 48 hours of class convening, height/weight assessment and BCA will be conducted IAW OPNAVINST 6110.1 (series). If student fails to meet standards they will be disenrolled from training. When reporting for class, students shall be in Navy Working Uniform and must bring their Navy PT Uniform for height/weight assessment.
|Quotas Controlled by BUPERS, PERS-409C.
Contact Detailer at DSN 882-3845.
E-MAIL questions regarding quotas or cancellations to email@example.com